At its research and test facility in Porsgrunn, Norway, Hydro has produced aluminium from aluminium chloride for the first time. This marks an important milestone in the development of a technology the company has been working on since 2016. HalZero could eventually replace the process that has dominated primary aluminium production for more than 140 years.
A new electrolysis process without CO₂ emissions
Primary aluminium is currently produced mainly using the Hall-Héroult process, developed in 1886. In this process, alumina is converted into liquid aluminium using electricity. During electrolysis, oxygen from the alumina reacts with carbon anodes, generating CO₂ emissions that cannot be eliminated even if the electricity comes entirely from renewable sources.
This is where HalZero comes in. Instead of electrolysing alumina directly, it is first converted into aluminium chloride. Aluminium is then produced through electrolysis. The process is designed to keep chlorine and carbon in closed loops. In this way, Hydro aims to eliminate CO₂ emissions from both electrolysis and anode production, releasing oxygen instead of carbon dioxide.
Rather than simply switching to renewable energy, HalZero therefore represents a fundamental change in the metallurgical production process.
First successful metal production at the test centre
The research and test facility in Porsgrunn has been operating since January 2026. Hydro is using it to test the individual process steps of the new technology. The Norwegian government is supporting the project through the state-owned enterprise Enova. Hydro is also working with research institutions including the Norwegian University of Science and Technology (NTNU) and SINTEF.
"Producing the first metal demonstrates the technology developed in partnership with leading Norwegian research institutions, including NTNU and SINTEF, works. It paves the way for the continued development, maturation and testing of a technology with the potential to enable emission-free aluminium production in the future," says Eivind Kallevik, President and CEO of Hydro.
However, HalZero is still at an early stage of development. At present, production still generates CO₂ emissions. The technical feasibility of continuous production on an industrial scale has yet to be demonstrated.
Next step: Industrial concept pilot
Following the successful production of aluminium, Hydro is now focusing on integrating the individual process steps. An industrial concept pilot will aim to bring together and test all the necessary processes under conditions closer to industrial operation.
The experience gained at the test centre will provide the basis for further technology development and subsequent industrial scaling. According to Hydro, several years of targeted testing and piloting will still be required before the technology could be ready for industrial use.
The project is of considerable significance for the aluminium industry. It is also relevant to the die casting industry, which processes large quantities of aluminium, including primary metal, and faces growing pressure to reduce emissions across its products' entire supply chains. Lower-emission primary aluminium production could make an additional contribution to these efforts in the future.

