We use the thermal deburring method where the quality of the machining has a substantial affect on the function of the component or where labor-intensive machining operations must be replaced.
In this process all burrs present on the work piece are burnt off in a deburring chamber which is filled with an oxygen – fuel gas mixture. Burning of the burs, which is accomplished with no removal of material, takes only a few milliseconds, so that the work pieces are only inappreciably warmed.
The quality of the deburring, especially the complete stabilization of all burr edges, is determined on the one hand by the gas volume and on the other by the mixing ratio of the oxygen – fuel gas mixture. Consequently, the optimum configuration of any required deburring equipment is a decisive factor in the results.
Advantages:
For further information about our company and processes please visit our website.
In this process all burrs present on the work piece are burnt off in a deburring chamber which is filled with an oxygen – fuel gas mixture. Burning of the burs, which is accomplished with no removal of material, takes only a few milliseconds, so that the work pieces are only inappreciably warmed.
The quality of the deburring, especially the complete stabilization of all burr edges, is determined on the one hand by the gas volume and on the other by the mixing ratio of the oxygen – fuel gas mixture. Consequently, the optimum configuration of any required deburring equipment is a decisive factor in the results.
Advantages:
- All deburring points on the work piece are deburred
- Very high process reliability
- The burr roots are sealed
For further information about our company and processes please visit our website.