The patented PantaTec process helps to improve and stabilize any blasting processes significantly.
Blast cleaning is often used in the pressure die casting applications to manufacture a surface finish or to just clean the parts surfaces for following production steps.
But residues of release agents, lubricants and corrosion protective media often cause changing dark layers and spots on the parts surfaces. This often leads into customer’s complaints and unnecessary expensive reworks.
Besides that, the blasting media becomes sticky and the blasting system is highly contaminated.
This is caused by the dust from the blasting process itself and other dirt remaining due to the sticky filmish layer. This cannot be cleaned by conventional blasting, but with the help of the patented PantaTec system.
The patented PantaTec process provides a remedy:
The automatic dosing unit INJECTO 05 feeds the cleaning agent ULTIMATE directly and process reliable into the running blasting process.
The cleaning agent Ultimate binds the interfering residues extremely quick and removes them immediately to out of the process and the blasting system simply via the dust extraction.
On direct command of the blasting system the cleaning agent ULTIMATE is introduced in the pre-adjusted quantity directly into the blasting media, so directly in the feed flow to the wheels or the pressure vessel. The blasting media takes up the additive and mixes this. The additive immediately takes effect and peels away release agents and auxiliaries. These are then safely removed from the blasting process through the air wash separation, dust extraction and filter units. Consistently and evenly clean product surfaces are achieved.