Shell casting temperature control unit Green Shell
The Green Shell temperature control unit is the ideal solution for the mould cooling in the low pressure/shell casting applications.
The Green Shell is a water unit with maximum operating temperature of 90°C.
The high flow grants a good cooling effect also in moulds having temperature of 400° – 500°C. The pump flow is of 160 litres/minute.
The shell casting temperature control unit is controlled by PLC and the interface with the press is made through digital inlets. The PLC is supplied with Touch Screen display.
It is possible to set the temperature, to store receipts, to read temperatures and pressures.
The temperature controller is supplied with 5 ways manifold, controlled by pneumatic valves.
The manifold must be installed as close as possible to the mould, so that there is one only main delivery pipe between Green Shell and manifold and short hoses with small diameters between manifold and mould.
The Green Shell includes:
– Flow test to check each way to the mould
– Pressurizing test to verify if there is any water loss
– Mould emptying at the end of the production
Water circuit in non-ferrous material
Stainless steel pump
Stainless steel tank
Stainless steel brazed-plate heat exchanger
Communication protocol available: CanBus, ModBus
Alarm signal linkable to the press
Double test for the control of the water circuits in the mould
Mould emptying at the end of the production