Also available as twin unit
moulds in die casting industry, rollers, plates
Heating capacity: 16kW up to 144 kW
Temperature range: up to 360°C with heat transfer oil TOOL-THERM SH-3
Cooling capacity: 90 kW at 360°C circulating temperature
Closed hot oil circuit with integral cold oil receiver in a large expansion tank. Oil cracking is impossible. Long life expectancy of the oil, due to low watt density heating elements and a high flow rate. A drip pan under the expansion tank prevents the unit from getting dirty if it is filled incorrectly. This model is designed for highest temperatures and optimum safety.
- Self-optimizing temperature controller with digital display of the set and actual temperature. With high precision regulation in 1/10° range; can be adjusted to read °C or °F.
- Automatic temperature control - difference between set and actual temperature activates an alarm.
- Digital flow indication with control of the minimum flow.
- Indication of the pump pressure.
- Reversing switch for temperature controlling at the mould.
- Leakstopper device – unit can be used in pressure or vacuum mode. No medium is lost on leaking tools, therefore ensuring continued production.
- Automatic mould drain.
- Lime scale free heat exchanger.
- Leak free high temperature pump with axial face seal.
- Hot oil circuit with by-pass, which ensures internal circulation if valves are closed.
- Expansion tank with a drip pan.
- No oil cracking because of special construction of the heating elements.
- Heating switchable in stages.
- Level control for dry run protection.
- Electronic temperature limiter in the controller and separate mechanical safety thermostat.
- Main switch, transformer and motor protection switch.
- Horn in case of failure.
- All failures are visually indicated.
- Unit on castors.
- Equipped with the controller MP-988 allows over 30 different digital interfaces: RS-232, RS-485, Current Loop 20mA, CAN-bus, Profibus etc.
- Leak free high temperature pump with magnetic drive.
- Additional plate heat exchanger for very high cooling capacity below 80°C.
- Digital clock timer.
- External command of the controller.
- Collective alarm.
- With regulation of pressure.