PhoenixTM GmbH
Dehmer Straße 48
32602 Bad Oeynhausen
Nordrhein-Westfalen
Germany
Phone: +49(0)5731.30028-0
Fax: +49(0)5731.30028-14
Process reliability in heat treatment? - PhoenixTM measuring systems are the solution!
In heat treatment processes up to 1000 ° C or more, often under certain atmospheres or conditions such as nitrogen or vacuum, it is very difficult to determine the actual temperatures at and in the product. This is where PhoenixTM comes into play: with the temperature measuring systems, for example the TS02 series, the temperatures can be measured directly in the oven, at the product or the measuring rack, recorded, stored and, if necessary directly via radio transmission, seen and evaluated. Special materials and a sophisticated construction to avoid excessive distortion allow regularly measurements with exact results even in processes with gas quenching or aggressive atmospheres.
Other series, such as the TS12 systems with their 2-stage insulation, can go through the complete carburising process, including the oil quench bath. So not only the temperatures in the oven, but also the heat transfer in the quenching bath become visible. Steam bubble formation or insufficient flow can be detected and optimized. In turn, the TS06 series is capable of measuring processes with liquid media, such as the water bath during annealing of stainless steel or in solution treatment processes of aluminum. Through the water evaporation technology, the system can measure the complete process from solution treatment to quenching and the hot aging furnace. This gives the user a complete and informative overview of the actual product temperatures and can measure very easily, regularly and reproducibly according to quality specifications and standards.
With the ThermalView Survey Software, the user receives a complete AMS2750 or CQI9 evaluation. With just a few clicks, detailed analyzes for audits and quality assurance processes can be provided.