ErgoPack Deutschland GmbH

Ergonomic pallet strapping system with electrically driven ChainLance. 
Strapping without bending, comfortable in an upright position with ideal working height. The pallet can be strapped comfortable by one person from one side. This works length- and crosswise the pallet. Floor clearance requested is only 8 cm (special design possible from 5,0 cm floor clearance on). 
Central power supply with battery for strapping machine and sealing head. With the novel aluminum keypad, optimal setting of tension force and welding time possible. The display shows you at any time the set tension force and the welding time. So you are mobile and always and everywhere on standby.

• 712E / 725E / 740E with electrically driven ChainLance, electronically controlled speed via joystick
• Fully integrated sealing head (tension force 1200N / 2500N / 4000N)
• Tool-Lift for sealing head
• for PP- and PET-Straps

Special Equipment:

• Triplex–Tool–Lift: The Triplex–Tool–Lift enables tensioning and sealing not only on the side of a pallet (side sealing), but also on the top (top sealing). Minimum pallet height for side sealing is 760mm. Maximum pallet height for top sealing is 780mm.
• Line–Laser: The Line–Laser indicates the distance and the alignment of the machine to the pallet, which simplifies the positioning of the machine in front of the pallet.
• Reversing sledge: Reversing sledge 85S: Smaller version of the standard sledge. Minimum clearance width: 160mm. Reversing sledge 47: For strapping pallets of a minimum clearance height of 47mm.
• Headpiece with bumper: For strapping pallets with lateral overlappings up to 40mm, e.g. cardboard covers or uneven side surfaces
• Sealing head removable from the Triplex–Tool–Lift: If the strap needs to be tensioned and sealed in positions which cannot be reached by the Triplex–Tool–Lift, e.g. inside a mesh transport box or with horizontal strapping
• Strap brake relief: The brake resistance of the strap roll ran be reduced to 20% by simply pushing a foot pedal. The manual pulling out of an additional strap is made much easier.

The "Aktion Gesunder Rücken e. V." certified ergonomically pallet strapping system of ErgoPack (www.agr-ev.de) 
 

With the mobile sledge tunnel station scantlings can be embedded flexibly and exactly when strapping.

With the new station it is possible to adapt the sledge tunnels in a stepless distance to each other according to your requirement with the help of an integrated tape measure. Simply and precisely.

The height difference to the floor is equalised by a special trolley so that it can be used a serial ErgoPack strapping system with this mobile station.

The whole station can be moved easily by a forklift and, therefore, can be applied everywhere at once. The station can be adapted also to uneven grounds because of its adjustable legs. When not used, the station can be simply stored e.g. in a pallet rag.

The mobile sledge tunnel station is always customised to your requirements such as:

• length and width of the scantlings
• quantity of the scantlings to embed to the package
• weight of the package
• and so on

With the stationary sledge tunnel scantlings can be embedded when strapping pallets.
The stationary sledge tunnels are fixed at the floor and can be used with any standard ErgoPack strapping system.
The tunnels are adapted individually to the width of the scantlings to embed.
For each scantling you need 2 sledge tunnels. 1 set consists of 2 tunnels.