FIMRO GmbH

• simple and quick identification of the contamination of the filter by green / red signal
• measurement based on the differential pressure at the filter
• adapted for water and oil temperature control units
• automatic reset of indicator

For optimum temperature control of molds, the contact surface between tempering medium and mold steel is of crucial importance. Depending on the temperature control medium and operating conditions, lime, rust or oil carbon form over time. These form deposits in the tempering channel, which narrow the cross-section of the channel and hinder the heat transfer between the forming steel and the tempering medium very much. Thus, there is a creeping increase in the heating or cooling times and a deterioration in component quality.

Our systems for cleaning tempering channels remove these impurities without any otherwise necessary dismantling of the molds. During the cleaning process, the flow and tightness of the individual temperature control channels can also be checked.

The advantages at a glance:

• Internal cleaning without disassembling the mold
• Maintaining a constant flow through the temperature control channels
• Constant heat transfer between mold steel and tempering medium and achieving a constant quality
• Reduction of personnel costs for maintenance / repair of the tools
• Simple leak test of the temperature control channels (option)
• Application of a temporary corrosion protection when used for water tempered channels
• Check the flow before setting up on the machine

http://www.fimro.com/verkauf.html

A consistent application of release agent by spraying tools is essential for process-reliable production. Our cleaning systems for spray tools of all manufacturers are used in preventive maintenance. The adhering contaminants are dissolved and rinsed in the channels and nozzles of the spraying tools. For this cleaning, the spraying tool does not have to be disassembled, thus the personnel costs are significantly reduced compared to a manual disassembly and cleaning. Furthermore, the orientation of the spray nozzles is maintained and the spray pattern is thus reproducible.

The advantages at a glance:

•  Internal cleaning without disassembling the spray tool
• Maintenance of the adjustment and thereby omission of the realignment at the start of casting
• Channels and nozzles have a constant release agent passage and thus remain the same order of release agent
• Quality increase due to the consistent release agent application
• Reduction of personnel costs for maintenance / repair of spray tools
• Simple leak test of the entire spraying tool
• Applying a corrosion protection, thus no passivation necessary before storage

http://www.fimro.com/verkauf.html

In 1999, we started building a specialized workshop to offer our customers the benefits of a total package of technical advice, sales and service. With about 25 service technicians, we can provide maintenance and service work for temperature control of all manufacturers both in our workshop and on site.

In addition to the classic repair, we also offer a safety-related review in accordance with valid regulations, a review of the built-in measuring devices of the temperature control units to ensure compliance with auditing requirements of the end customer and the review of the system performance. Of course, the customer receives a corresponding documentation of these reviews.